DIY16-1412 16' Pre-Charged Line Set 1/4"-1/2"

DIY16-1412

DIY SELF INSTALL

DIY16-1412

-16ft 1/4 x 1/2 Line Set for DIY 9K, 12K & 18K Indoor Air Handler (no cable)

─────────────────────────────────────────────────────────────

The MrCool DIY Line Set (9k, 12k & 18k BTU) is easy to install and designed exclusively for MrCool DIY mini splits. Pre-charged with R-410A and featuring Quick Connect fittings, setup is a breeze—just tighten with two wrenches for a leak-free seal! Need extra length? Simply extend with Quick Couplers. Fast, simple, and hassle-free!

• Liquid Line Size: 1/4"
• Suction Line Size: 1/2"
• Quick Connection Fitting Type
• R-410A Charged
• DIY Series

─────────────────────────────────────────────────────────────

Compatibility

DIYCOUPLER-1412 - 1/4" 1/2"

Disclaimer:

The compatibility information provided in this article is specific to units within the same series. While additional compatibility with other series and units may exist, it is not detailed here. For further assistance or confirmation of compatibility with other systems, please contact MRCOOL support.

─────────────────────────────────────────────────────────────Quick Link

DIY Pre-Charged Line Sets 1/4"-1/2"

─────────────────────────────────────────────────────────────

*Things to know about installation

• Keep fittings clean to prevent contamination.

• Feel the bend, avoid kinking your line.

• Store extra length horizontally behind the condenser.

• Use a Quick Coupler to extend the length.

• MRCOOL always advises against hiding lines between walls

• Always perform a leak test before opening valves

─────────────────────────────────────────────────────────────📞 (270) 366-0457
📧 support@mrcool.com
📝 Submit a support ticket